Cinterion
®
MV31-W Hardware Interface Description
5.7 Reliability Characteristics
75
t
MV31-W_HID_v01.009a
2022-04-27
Public / Preliminary
Page 63 of 76
5.7
Reliability Characteristics
The test conditions stated below are an extract of the complete test specifications.
Table 27:
Summary of reliability test conditions
Type of test
Conditions
Standard
Shock Test
(Non-operating)
Amplitude: 400G, Waveform: 1/2 sine, 2 msec
duration,
Repetition: 6 times / each axis
DIN IEC 60068-2-27
Vibration
(Non Operating)
Sinusoidal
Amplitude: 3.0G peak to peak,
Frequency: 5hz - 500hHz,
Freq Sweep rate : 0.5 Octave/min,linear,
Duration: 2hr/each axis
DIN IEC 68-2-36
Vibration
(Non Operating)
Random
3.0 G rms, Frequency Range: 10hz to 500hz,
Duration: 1hr / each axis
DIN IEC 68-2-36
Damp Cycle
High Temp:70°C, Low Temp = 25°C,
Humidity: 95%, Duration: 12H+12H,
Repetition: 6 times
DIN IEC 60068-2-30 Db
Thermal Shock
-40°C/85°C, 500 cycles
Function check point interval 200, 500 cycles
DIN IEC 60068-2-14 Na
Drop Test
Height: 100cm, concrete or steel
6 drops (all surfaces)
DIN IEC 60068-2-31
