Getting Started with 5G Modem Card
2.3 Start Up the Modem Card
38
t
MV31_startup_guide_v04
2021-03-02
Public / Released
Page 10 of 39
2.3
Start Up the Modem Card
After connecting the 5G Modem Card to the 5G Modem Card Adapter Board as described in
, the 5G Modem can be used.
Note:
The driver package provided by Thales needs to be available. Extract and Copy the sup-
plied driver files to a folder on the Windows computer. Be sure to use the latest driver software
supplied by Thales.
The driver package depends on the interface of the MV31-W Variant (USB or PCIe) and con-
tains all the drivers needed for this variant MV31-W (see
).
2.3.1
Script based Driver Installation
The drivers can be installed by a script. Therefore connect the Starter Kit with your PC first.
Then run as "Administrator" the file "install_Thales.cmd", which is provided with the driver pack-
age. When unpacking the driver package, don’t use space character in the folder path.
After running the script the interfaces shown in
for USB or
for PCIe should be
installed.
Table 1:
Driver Package Content
Driver
Installation
sequence
Starter Kit connected via USB3.0
MV31-W connected via PCIe M.2 or
PCIe Edge Connector
Directory
Directory
MHI
1
not required
-
required
\MHI
UDE
2
not required
-
required
\UDE
QUD
3
required
\QUD_GNSS
required
\QUD_GNSS
GNSS
4
required
\QUD_GNSS
required
\QUD_GNSS
