Series CT Manual
© Copyright 2004 Topway Global Inc.
4
FAUCET AERATOR INSTALLATION
Remove the existing aerator from the faucet and attach the new special aerator (CT-322)
included with the RO unit. Consult <fig.3>. The special aerator included with the RO unit
will fit most standard faucets. However, if the aerator does not fit your faucet, consult your
dealer. Most hardware or plumbing stores carry a complete line of faucet adapter fittings.
When tightening the fitting use a pair of pliers and tighten carefully (wrap tape around the
jaws to prevent marring the fittings).
To attach the faucet snap adapter to the special aerator, pull down on the snap adapter plastic
collar and push onto the special aerator until it seats. Release the plastic collar. The plastic
collar will snap into place.
It is important that the hose lay flat on the counter with no sharp bends or kinks. This will
allow the overflow failure to function properly.
Male thread faucet
Female thread faucet
Thick Washer
Thin Washer
CT-322
Special aerator
Snap adapter
Plastic collar
Snap adapter
CT-391/2
Wing valve
Hose to RO
<Fig.3>
