Tgard PS-7900MI Series User Manual Download

Page: 65 / 170

User Manual of PS-7900SI/MI Series DVR

Find the record files you want to protect, and then click the

icon which will turn to

indicating that the file is locked.

Note:

The record files of which the recording is still not completed can’t be locked.

Click

to change it to

to unlock the file and the file is not protected.

Figure 5.31 Unlocking Attention

Protect file by setting HDD property to Read-only

Note:

To edit HDD property, you need to set the storage mode of the HDD to Group. See

Chapter 10.4

Managing HDD Group.

Steps:

Enter HDD setting interface.

Menu> HDD

Figure 5.32 HDD General

Click

to edit the HDD you want to protect.

Figure 5.33 HDD General- Editing

Set the HDD to Read-only.

Click

to save settings and back to the upper level menu.

Summary of Contents for PS-7900MI Series











































































































































































Search results

Summary of Contents for PS-7900MI Series

Reviews:

Related manuals for PS-7900MI Series

Brands by name

Popular brands

Tgard PS-7900MI Series, User Manual

Search results

Summary of Contents for PS-7900MI Series

Reviews:

Related manuals for PS-7900MI Series

Brands by name

Popular brands