TGA Zest, Operating Instructions And Owner'S Handbook

Page: 9 / 16

9
4. Fold down your tiller by placing one hand on the tiller handle and with the other rotate the hand
wheel located at the bottom of the tiller anti clockwise. Once the tiller moves freely you can move it
all the way down and turn the hand wheel clockwise until it is tight and holds the tiller in place.
5. Lock the tiller in its central position by turning the tiller lock (located at the bottom of the tiller,
under the headlight) 90 degrees clockwise.
Assembling
1. Unlock the tiller by turning the tiller lock (located at the bottom of the tiller, under the headlight)
90 degrees clockwise.
2. Lift up your tiller by placing one hand on the tiller handle and with the other rotate the hand
wheel located at the bottom of the tiller anti clockwise. Once the tiller moves freely you can move it
all the way up and turn the hand wheel clockwise until it is tight and holds the tiller in place.
3. Reconnect rear sub frame by lining up the main chassis and the rear sub frame and tilting the
subframe upwards. Lift the main chassis using the rear subframe release lever and place the
connectors on the main chassis onto the bar of the rear subframe. Push the main chassis down
and or tilt the rear subframe downwards until the two parts click into place.
4. Reconnect the battery pack(s) by placing it/them onto the base of the scooter. Ensure they click
into place.
5. Reconnect your seat by lifting up the seat swivel lever and lowering your seat down so that the
lug in the seat post fits into the hole in the base plate of the seat. Release the seat swivel lever and
ensure the seat clicks into position.