11
4.2 HOW TO SET THE FREE WHEEL MODE
Drive Mode
:
Push the free wheel mode lever on the scooter towards the rear of the scooter, and the scooter will
be driven by the motor.
Free wheel Mode (Fig 4.2.2): Push the free wheel mode lever on the scooter forwards towards the front of the
scooter and the scooter can be pushed manually.
Fig 4.2.1 Drive Mode
Fig 4.2.2 Freewheel Mode
4.3 TILLER ADJUSTMENT
The Tiller can be adjusted by the following steps.
1. Turn the handwheel anti-clockwise to loosen (
Fig 4.3.1
).
2. Adjust the tiller angle to the desired position; turn the handwheel clockwise to tighten.
Fig 5.4
Driving your Scooter
1.
Ensure the seat is installed properly and locked in the straight ahead position.
2.
Ensure the tiller is in a comfortable position and secured by the handwheel as described above.
3.
Ensure the electromagnetic brake is in drive mode as described above.
4.
Ensure the speed control lever is not accidentally being depressed and turn the key
switch to “ON”.
5.
Check battery gauge to see whether there is enough power for your journey. If you have doubts about the
remaining power, please charge the battery before departure.
6.
Set to a safe speed on the speed dial.
7.
Be aware of traffic and pedestrians and make sure it is safe before setting off.