CCTV Tester User’s Manual
2
1
，
，
，
，
Safety Information
1.1 Precaution before using the tester
A. Make sure to read the user’s manual before using the product.
B. Make sure to check the input and output range of voltage or current at every input and
output ports before connecting, so that the system cannot be overloaded.
C. The following operational environment should be maintained constantly:
Temperature: -30
℃
--- 70
℃
Relative humidity: 30% ~ 90%
Recharging voltage: DC5V
1.2 Precautions when using the tester
A. Do not use the tester in damp humidity or leaking gas environments.
B. Do not touch the tester with wet hands.
C. Be mindful not to shock or shake the tester while in use to avoid damage.
D. Avoid the places of strong magnetism or electric wave, which could cause incorrect
measuring.
E. Be careful not to expose the ports or joints to dirt or liquid.
F. Do not disassemble the tester.
1.3 Precautions for battery charging and using
A. Use only original chargeable battery with the tester, when charge the batteries, please
use the original power adapter.
B. Make sure not to disorient the polarization of batteries.
C. Do not short-circuit or disassemble batteries.
2
，
，
，
，
Introduction
2.1 Features and function
A. Video test
The video signal and the quality of picture can be tested.
B. PTZ controlling
It has the basic operational test of PTZ products, function include pan/tilt, zoom in/out,
preset setting and operation, speed adjustment etc; support multi-protocol and baud
rate, communication via RS-232, RS422 simplex and RS485 port.
RS485 protocol include: Pelco D,P, Samsung, Panasonic, Molynx.
