User Manual
20
Configure
Click on
“
AP Configuration
”
button, enter the page as shown below, you can
be configured for AP configuration issue and unified configuration issued, and other
basic parameters can be configured.
Tips:
After click
“Apply”, All configuration operations on the AP configuration page
will take effect and issued. During the process of issued, AP will automatically
reboot. During this process, do not perform any other configuration changes.
Upgrade
Click on
“
AP Upgrade
”
button, enter the page of AP Upgrade, can be on line
AP batch upgrade.
AP version of the upgrade process takes about 3 minutes, after the completion
of the upgrade can be in the
“
current version
”
of the column to view the updated
version of the information,
Please note in the upgrade process, DO NOT cut off the power supply or
disconnect the cable connection.
System Maintenance
Click on
“
AP System Maintenance
”
button, enter the page of AP System
Maintenance, you can restart or reset the AP managed by M-3/M-5.
