©Copyright Task Force Tips LLC 2021
10
LIY-350 January 13, 2021 Rev00
4.3 HORIZONTAL ROTATION TRAVEL STOPS
The range of horizontal rotation travel for the Radius monitor is continuous 360 degrees. A horizontal rotation travel stop bolt may be
installed in the monitor to limit travel. Note that left and right are relative to the “Straight Ahead Reference Mark”.
Figure 4.3
4.4 ELEVATION TRAVEL STOPS
The range of elevation travel for the Radius monitor is 90 degrees above to 45 degrees below horizontal. Refer to Figure 4.4 if limited
elevation travel is desired.
Figure 4.4
Straight Ahead
Reference Mark
Y4145 Stop Bolt
90 Left and 90 Right travel
with stop bolt installed.
Continuous 360 travel
without stop bolt
Y3146 Adjustment Disc
10 less right travel for every
adjustment disk installed on
this side of stop bolt.
Y3146 Adjustment Disc
10 less left travel for every
adjustment disk installed on
this side of stop bolt.
Replace set screw with
Stop Bolt (Y3515)
to limit elevation travel to
between 30 degrees above
and 90 degrees above horizontal.
