19
Figure 6.1. Marking of the fastening
TFortis TH camera housing.
IMPORTANT!
When this option is enabled, after the power is applied to the
switch, the cameras will only turn on after time of Soft Start Time. To force
the cameras to turn on, click on Manual Start.
5.6
Enabling backup protocols
If you connect switches into a ring, then you need to enable the RSTP
protocol. Otherwise, if alternative paths appear, your network will not work.
By default, RSTP is disabled.
6. Device installation
6.1. Unit mounting
Housing has four attachment points along the edges of the unit. The
marking of the fastening for the installation of the product is shown on the
Fig. 6.1.
IMPORTANT!
Drilling of the housing leads to the sealing violation of the
entire switch and, as a consequence, the loss of the warranty.
