20
7.2 Installation of the cabinet on lamp posts
To install the cabinet on the lamp post, use TFortis Attachment Set (pole mount
kit KKC-Hot), see the KKC-Hot Operating Manual.
Figure 7.2 After installing the cabinet attach the top shield.
IMPORTANT!
KKC-Hot is not included in the scope of supply
7.3 Optical connections
The switch has an optical distribution frame. For ease of operation, the optical
distribution frame can be removed from the cabinet. The optical cable is pulled
into PG13.5 cable glands. The optical cable is attached to the metal base of the
distribution frame with nylon ties. Optical fibers are laid in a splice cassette for
12 shrinkable plastic sleeves. Welded pigtails are connected to SC adapters
located on the adapter panel. Then the adapters are connected to SFP modules
with the use of optical patch cords. It is allowed to connect the pigtails directly to
SFP without any unnecessary connections.
