FUNCTION SETTING:
FUNCTION SETTING:
FUNCTION SETTING:
You can adjust the way the transmitter works, by accessing the function menu:
Access the function menu by pressing and holding the Select and Set buttons for 3 seconds. The hour will flash.
Press Select until you see the required function number flashing in the display.
The function can be adjusted by
pressing the up or down arrow, then confirm with the Select button.
Available functions are noted below.
Note that the device will ‘time-out’ to normal running mode if no key is pressed for 15 seconds.
F2 = Day group or individual day selection
Day group selections are 5 — 2, or 7 — 0. If you select 5 — 2, you can programme 5 time / tempera-
ture steps throughout each day, applicable to weekdays, and 5 further time / temperature steps appli-
cable to Saturday and Sunday. If you select 7 — 0, you can programme 5 time / temperature steps
for each
individual
day. Confirm your choice with the Select button.
F3 = Calibration
The default calibration (accuracy of thermostatic control), is 0.5
0
C. You can change this to 1.0
0
C if
you wish. Confirm with Select button.
F4 = Displayed Temperature Calibration
You can adjust the displayed temperature in the range + or — 4.0
0
C. Confirm your choice with the
Select button.
F5 = Real-time Clock Calibration
You can adjust the accuracy of the real-time clock in the range — 35 to + 35 seconds per week. E.g.
if the clock displays a time which is slow or fast by 10 seconds over a period of one week, you can
adjust this function setting by + or — 10 in order to correct the time-keeping in subsequent weeks.
Press the “SET” button to return to normal running mode.
Pre
Pre
Pre
-
-
-
set program:
set program:
set program:
The HWPRS incorporates a factory pre-set program. You can view and amend any of the times or temperatures
within the pre-set program, which is shown in the table below.
Note that, if no key is pressed for 15 seconds, the
device will time-out to normal running mode:
Program
Weekday (Mon—Fri)
Weekend (Sat, Sun)
1
Time: 6:00 a.m.
Time: 6:00 a.m.
Temperature: 21
0
C
Temperature: 21
0
C
2
Time: 8:00 a.m.
Time: 8:00 a.m.
Temperature 17
0
C
Temperature 17
0
C
3
Time: 4:00 p.m.
Time: 4:00 p.m.
Temperature: 21
0
C
Temperature: 21
0
C
4
Time: 6:00 p.m.
Time: 6:00 p.m.
Temperature: 21
0
C
Temperature: 21
0
C
5
Time: 10:00 p.m.
Time: 10:00 p.m.
Temperature: 17
0
C
Temperature: 17
0
C
REVIEW AND/OR AMEND PROGRAMME SETTINGS:
REVIEW AND/OR AMEND PROGRAMME SETTINGS:
REVIEW AND/OR AMEND PROGRAMME SETTINGS:
Press the Set button, the day or day group (as determined by function F2 described above), will flash. While the day
or day group is flashing, you can change to another day or day group if you wish, by pressing the up arrow button.
Confirm your choice with the Select button. You will now be viewing the pre-set program number 1. The hour will
flash, change this if required with the up or down arrow buttons. Confirm your choice with the Select button. The
minutes will flash; change this if required with the up or down arrow buttons. Confirm your choice with the Select
button. You will now be viewing the pre-set program number 2, and you can continue programming in the same
way: the flashing element in the display can be changed with the up or down arrow buttons, and the new value can
be confirmed with the Select button.
If you selected day group 5 — 2, you can review (and amend) programs 1 — 5 above for week-
days, and separately, programs 1 — 5 for weekends.
If you selected day group 7 — 0, you can review (and amend) programs 1 — 5 for every day of
the week, giving a total of 35 program settings for the whole week.
2
2
2
