26
MANUAL SETTINGS:
The following manual settings can be done in the setting mode:
•
Time zone
•
Time reception DCF ON/OFF
•
Manual time
Press and hold the
SET
key for about 3 seconds to advance to the setting
mode:
TIME ZONE SETTING:
The time zone default is "0
"
hour. To set a different time zone:
1.
The current time zone value starts flashing.
2.
Use the
+
key to set the time zone. The range runs from 0, -1, -2…
-12, 12, 11, 10… 2, 1, 0, in consecutive 1-hour intervals.
3.
Confirm with the
SET
key and enter the
Time reception On/Off setting
.
TIME RECEPTION ON/OFF SETTING
In area where reception of the radio-controlled time (DCF time) is not possible,
the time reception function can be turned OFF. The clock will then work as a
normal Quartz clock. (Default setting is ON).
1.
The digit “ON” digit will start flashing on the LCD.
2.
Use the
+
key to turn OFF the time reception function if necessary.
3.
Confirm with the
SET
key and enter the
Manual time setting
.
Note:
If the Time Reception function is turned OFF manually, the clock will not
attempt any reception of the radio-controlled time (DCF time) as long as the
Time zone (flashing)
flashing
