steady
decreasing
1.5.6.1 Temperature Alert function:
•
Press “ALERT” button (B4) to set the Temperature Alert function on or off. “ ”
appears on the LCD if this function is on.
•
Hold “ALERT” button for 3 seconds to enter the Alert setting mode. Indoor
temperature flashes. Press “+” or “-” button to select indoor or outdoor
temperature and the requested channel for the temperature alert. Press ”ALERT”
button to confirm the settings. Press “ +” or “-” button to set the upper “
” and
lower “
” limit of the temperature. If you want to select only one value, set the
final value as upper or lower limit (Indoor temperature: 0°C ~ +50°C, Outdoor
temperature: -50°C ~ +70°C).
1.5.7 Outdoor thermo sensor unit registration procedure:
•
The weather station automatically starts receiving the outdoor temperature signal
from the Outdoor Thermo Sensor and the Sensor will transmit the temperature to
the weather station after new batteries are inserted.
•
The batteries compartment of the Thermo Sensor is located behind the back cover.
Unscrew it to open. Press “TX” button (D6) on the Thermo Sensor unit to transmit
temperature to the weather station manually (e.g. for testing or in case of loss of
transmitter signal). The weather station gives a “beep” sound if it received the
temperature.
•
Press “°C /°F” button (D4) on the Thermo Sensor unit to select Celsius mode or
Fahrenheit mode for the Thermo Sensor display.
•
Close the battery compartment of transmitter carefully.
1.5.7.1 Additional Transmitters
•
The weather station allows you to add up to 3 transmitters. For having more than
one external transmitter (maximum3), select the Channel, CH1, CH2 or CH3 to
ensure each sensor is transmitting different channels before inserting batteries.
The channel select switch (D5) is at the back of the thermo sensor.
•
To retrieve different channels at Display Station press “CHANNEL” button (B2)
to view the 3 Channels’ temperature. For alternating channel display choose “ ”
