31
30
Radio-controlled alarm clock
8.2 Setting of the second alarm time
• Press the
SET 2
button in normal mode.
• 7:00 (default) or the last adjusted alarm time appear on the
display.
• Set the alarm time for the second alarm in the same way.
• To activate/deactivate the second alarm function, move the
switch
AL 2 ON/OFF
up (ON)/down (OFF).
9. Backlight
• Press the
SNOOZE/LIGHT
button.
• The backlight turns on for 5 seconds.
• The device is provided with a light sensor to turn on the light
automatically at dark.
• Use the
AUTO LIGHT ON/OFF
switch at the back to activate or
deactivate the backlight.
•
appears or disappears on the display.
•
Note: During a DCF signal reception, the lighting is temporari-
ly disabled or cannot be activated
10. Care and maintenance
• Clean your instrument with a soft damp cloth. Do not use sol-
vents or scouring agents.
Radio-controlled alarm clock
• Remove the batteries if you do not use the product for a long
period of time.
• Keep the instrument in a dry place.
10.1 Battery replacement
• Change the batteries when the battery symbol
appears on
the display.
• Open the battery compartment and insert the two new batter-
ies 1,5 V AA. Ensure that the battery polarity is correct
• Close the battery compartment again.
11. Troubleshooting
Problem
Solution
No display
➜
Ensure that the batteries’ polarity is
correct
➜
Change the batteries
No DCF reception
➜
Press the
–
button for 3 seconds
and and start the reception
manually
➜
Activate (ON) the DCF reception in
the setting mode
TFA_No. 60.2539_Anleitung_07_20 29.07.2020 16:32 Uhr Seite 16