– 26 –
– 27 –
Digital alarm clock with LED digits
• Connect the device to a suitable USB power source, such as a computer, or use a suitable power adapter (not included).
• A beep tone is heard and 00:00 appears on the display.
7. Settings
• Press and hold the
UP
or
DOWN
button in setting mode for fast mode.
• The device will automatically quit the setting mode if no button is pressed for 10 seconds.
7.1 Time setting
• Press and hold the
MODE
button in normal mode for three seconds.
• The hour digit will be flashing. Press the
UP
or
DOWN
button to adjust the hours.
• Press the
MODE
button again and you can adjust the minutes and the 24 - or 12-hour system with the
UP
or
DOWN
but-
ton.
• Confirm the setting with the
MODE
button.
Digital alarm clock with LED digits
7.2 Alarm time setting
• Press and hold the
ALARM
button in normal mode for three seconds.
• 6:00 (default) or the last adjusted alarm time appear on the display.
• AL and the hour digit start blinking. Press the
UP
or
DOWN
button to adjust the hours.
• Confirm the setting with the
ALARM
button.
• Set the minutes in the same way.
• Confirm the setting with the
ALARM
button.
• 5 (default) or the last adjusted snooze interval appears on the display.
• Press the
UP
or
DOWN
button to set the desired time duration (5 to 60 minutes).
• Confirm with the
ALARM
button.
• To activate and deactivate the alarm function press the
ALARM
button in normal mode.
• AL appears or disappears on the display.
• When the alarm is activated, the alarm starts to ring when the set alarm time is reached.
• Press any button (except
SNZ/LIGHT
) and the alarm will stop.
TFA_No. 60.2025_Anl_11_21 23.11.2021 15:11 Uhr Seite 14
