42
3.
Confirm with the
SET
button and enter the
Manual time setting
MANUAL TIME SETTING
In case the weather station is not able to detect the radio-controlled time (DCF time) signal
(due to disturbances, transmitting distance, etc.), the time can be manually set. The clock will
then work as a normal quartz clock.
To set the clock:
1.
The hour digits start flashing in the time display section.
2.
Use the
+
button to adjust the hours and then press
SET
button to go to the minute
setting.
3.
The minute will be flashing. Press the
+
button to adjust the minutes.
4.
Confirm with the
SET
button and enter the
Calendar setting
Note:
The unit will still try to receive the signal despite a manual setting. When the signal is
received, the manually set time will automatically be replaced by the received time. During
Hour (flashing)
Minute
