28
INSTALL AND REPLACE BATTERIES IN THE TEMPERATURE
STATION
The temperature station uses 2 x AA, IEC
LR6, 1.5V batteries. To install and replace
the batteries, please follow the steps below:
1.
Remove the cover at the back of the
temperature station.
2.
Insert batteries observing the correct
polarity (see marking).
3.
Replace compartment cover.
Battery replacement
•
Replace the batteries of the temperature station when the RX icon
appears on the display.
•
When the batteries of the outdoor transmitter are used up, the TX icon
appears on the display.
Note:
In the event of changing batteries in any of the units, all units need to be
reset by following the setting up procedures. This is because a random
security code is assigned by the outdoor transmitter at start-up and this code
