40
seconds before reinserting them.
4.
The outdoor temperature data from the first
transmitter (channel 1 and 2) should then be
displayed on the temperature station. Also, the
signal reception icon will be displayed. If this does
not happen after 2 minutes, the batteries will need
to be removed from both units and reset from step
1.
5.
If the temperature probe has been used, the
outdoor temperature from channel 2 will then be
displayed. Otherwise, the outdoor temperature will
display “---“.
Note:
The temperature probe from the first sensor
will always occupy “channel 2”. Channel 2 can
only be used for the temperature probe. If you
choose not to use the temperature probe, channel
2 will display “---“.
5.
Insert the batteries in the second transmitter as
soon as the outdoor temperature readings from the
first transmitter are displayed on the Temperature
Station.
Note :
User shall insert the batteries into the
second transmitter within 45 seconds after the
temperature station displays the information of the
first transmitter. Or immediately after reception of
the first transmitter is finished
6.
The outdoor temperature from the second
transmitter and the "channel 3" icon should then be
displayed on the temperature station. If this does
not happen after 2 minutes, the batteries will need
to be removed from all the units and reset from
step 1.
7.
In order to ensure sufficient 868 MHz transmission
however, the distance between the temperature
station and the transmitter should not be more than
