- 10 -
Appendix A Changing voice, language and settings
The TS-04 is capable of supporting 2 voice styles as well as English and Spanish
languages. Selecting these may be made by entering a special “Setup Mode”
Pressing the ‘CTRL’ and “S” key enables “Setup Mode”
Press “E
” to alternate language between English and Spanish.
(For Spanish, the “
ñ
” key is mapped at the English “
;
” key)
Press “V”
to alternate voices between Female and Male.
Press “F”
to restore all original factory volume and voice settings.
Press “S
” to save settings. This stores the current voice and language setting
in memory. The current selection of volume and speech rate will also be
saved and used as the new power up default setting.
Appendix B Replacing Keyboard Batteries
When keyboard batteries are replaced wireless links must be
restored for speech to be generated
Keyboard batteries should normally be replaced every year. However, when batteries are removed a special CONNECT
process MUST be used to reactivate the keyboard link to the TS-04.
This process is ONLY needed for KEYBOARD
batteries. The TS-04 9v main battery does not require this process.
Locate the 2 AAA keyboard batteries
Locate position of “CONNECT” button
Depress
BOTH
ON/OFF and SPEAKER
buttons
simultaneously
for 2 seconds
Wait for Speech Audio phrase
“Press Keyboard Connect Now”
Press the red CONNECT button on
the underside of the keyboard.
(Location is next to the battery compartment)
i
CTRL
S
E
V
F
S
Step 1
Step 2
Step 3
