Instruction manual SDK 85 CKR
page 8
__________________________________________________________________________
4. Description of the hydraulic cutting tool
4.1. Description of components
The hydraulic cutting tool SDK85CKR consists of the following components:
picture 1
carrying
handle
Pos.-Nr. 3
cutting
blades
cutting
head
coupling
Pos.-No.
1 Pos.-No.
2
Pos.-No.
4
Table 1
Pos.-
No.
Description Function
1
Blades
two sickle-shaped blades to cut the cables/conductors
2
Cutting head
Body of the working unit
3
Handle
Carrying grips to move and position the unit
4
Coupling
Leakage-free hydraulic coupling
5. Remarks in respect to the determined use
The pump must be positioned on an even surface with a max. angle of 15°.
In combination with a 2 m high pressure hose it is not possible to work in a cable trench.
For this application you need at least a 3m pressure hose.
5.1. Operation of the unit
1.)
Roll out the hose completely.
2.) Connect the cutting head (Pos.-No. 2) to the high pressure hose.
3.) Bring the cutting head into a proper cutting position. The blades should cut the cable
in a vertical position to avoid undesired shearing forces.
4.) Actuate the pump until the blades completely overlap and the cable is completely cut.
