Textron Jacobsen 730325, Setup, Parts & Maintenance Manual

Page: 16 / 56

14
Hydro
Midsize
LUBRICATION
ENGINE
DAILY
Remove the dipstick S and check that the oil level
reaches the full mark. If necessary, top off with fresh
oil. To obtain the correct oil level, the machine must
be level. See engine manufacturer’s manual for
proper oil viscosity and grade.
DO NOT OVER FILL!
AFTER THE FIRST 5 WORKING HOURS
While the engine is warm, remove the drain plug P
and drain the crankcase. Replace oil filter T . Clean
and replace the plug. Fill the crankcase through the
filler hole with fresh oil to the full mark. See engine
manufacturers manuals for oil and filter change
intervals.
Engine operator’s manuals are shipped with each
machine. Shop manuals for the engines are available
from your local engine dealer.
• For Kawasaki FH641V, order:
99924-2045-03
.
• For Kawasaki FH500V, order:
99924-2045-03
.
• For Kawasaki FH451V, order:
99924-2045-03
.
HYDRAULIC RESERVOIR
CHECK, DRAIN AND FILL
Check level every 100 hours or when a leak has
occurred. To check level: Remove reservoir cap. Add
10W30 oil until the oil level reaches the bottom of the
filler tube. Do not overfill.
EVERY 500 HOURS:
Change hydraulic oil and filter. Remove plug D to
drain reservoir. Remove and replace filter. Filter is
located on front of tank at
G . Reinstall plug and fill
with 10W30 oil to the bottom of the filler tube F .