RXM Reel Stand
6. Turn the reel stand crank arm clockwise to extend
one reel stand until the cable reel clears the ground.
(Fig. 5)
Figure 5.
Operation
(cont’d)
7. Turn the other reel stand crank arm until the spindle
is level and the cable reel rotates freely. (Fig. 6)
Figure 6.
8. When finished dispensing cable, the cable reel
should be lowered and stands put in storage config-
uration in the reverse manner as described above.
Note: If reel shifts to one side of setup during pull,
lowering is accomplished by turning the crank arm
in a half circle, folding the arm up, and repeating this
motion.
www.
GlobalTestSupply
.com
Find Quality Products Online at:
