Greenlee / A Textron Company
4
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
960 PS Series Hydraulic Power Pumps
IMPORTANT SAFETY INFORMATION
Procedure for depressurizing the hydraulic system:
1.
Disconnect the pump from the power source.
2.
Rotate the release lever clockwise.
3.
Disconnect the hose slowly to release any
trapped pressure.
Make sure all hose fittings are properly seated
before starting the pump. Incomplete connections
may not allow the accessory’s ram to retract after
the hydraulic operation is finished.
• The pump is heavy and requires two persons to
lift. Improper lifting can result in injury.
• Do not use hose or cord to pull, lift, or carry the
equipment. Misuse will damage the hose or cord.
Failure to observe these precautions can result in
injury or property damage.
Inspect pump, hoses, couplers, and fittings for
wear or damage. Replace worn, damaged, or
missing components with Greenlee replacement
parts. Worn or damaged components can fail,
resulting in injury.
Failure to observe this warning can result in
severe injury or death.
Wear eye protection when operating
or servicing this tool.
Failure to wear eye protection can
result in serious eye injury from
flying debris or hydraulic oil.
Skin injection hazard:
Oil under pressure easily punctures
skin, causing serious injury, gangrene,
or death. If injured, seek medical
help immediately to remove oil.
• Do not use hands to check for
leaks.
• Depressurize the hydraulic system
before servicing or disconnecting
the hose.
Electric shock hazard:
• Do not expose power tools to rain.
• Do not immerse the pendant
switch in water or other liquid.
Failure to observe these warnings
can result in severe injury or death.
Note: Keep all decals clean and legible, and replace
when necessary.
Fill unit with hydraulic oil before
operating pump.
Failure to fill unit with oil will result in
damage to the pump.
