910 Wire Dispenser
Greenlee / A Textron Company
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
3
IMPORTANT SAFETY INFORMATION
SAFETY
ALERT
SYMBOL
This symbol is used to call your attention to hazards
or unsafe practices which could result in an injury or
property damage. The signal word, defined below,
indicates the severity of the hazard. The message
after the signal word provides information for pre
-
venting or avoiding the hazard.
Immediate hazards which, if not avoided, WILL result
in severe injury or death.
Hazards which, if not avoided, COULD result in
severe injury or death.
Hazards or unsafe practices which, if not avoided,
MAY result in injury or property damage.
Read and understand all of the
instructions and safety information
in this manual before operating or
servicing this tool.
Failure to observe this precaution
may result in injury or property
damage.
Keep hands and feet clear when
loading and unloading wire spools.
Failure to oberve this precaution
may result in injury or property
damage.
Load and unload sides equally.
Load bottom spindles first, and
unload top spindles first. An unbal-
anced or top-heavy load could
cause wire dispenser to tip over,
causing injury and property damage.
Failure to observe this precaution
may result in injury or property
damage.
• Make sure bystanders are clear of the work area
when loading, unloading or dispensing wire.
Nearby personnel can be injured if wire dispenser
falls.
•
Do not use the wire dispenser for wire with
damaged spools. Damaged spools may not turn
freely and may pull over the dispenser.
• Use only on a hard, flat, level surface.
•
Do not exceed the rated capacity of this tool.
Failure to observe these precautions may result in
injury or property damage.
Use this tool for manufacturer’s use only. Use other
than that which is described in this manual may
result in injury or property damage.
Note: Keep all decals clean and legible, and replace
when necessary.
