Textron Cessna Citation Sovereign, Operation Manual

Page: 12 / 38

12
0120
AirCell Telephone
The AirCell Telephone provides voice, fax and data transmission capabilities during
flight. Use the system’s handset to perform all normal operations of the AirCell
Telephone. A backlit LCD screen shows telephone numbers, signal strength and AirCell
Telephone status. Use the keypad to enter phone numbers, menu selections, call
timer and other functions. For detailed information and instructions for using the
different services, refer to the AirCell User Manual.
Note:
§
- In lower left-hand corner of screen indicates telephone is on.
InUse - On lower part of screen indicates telephone in use.
NoSvc - Displays when telephone is not registered or service is unavailable.
To place an air-to-ground call:
1. Take handset from holder.
2. Use keypad to enter telephone number to be called.
USA/Canada: 1 + Area Code + Number
International: 00 + Country Code + Number
To dial another Iridium phone: 9 + 8816 + XXX.XXXXX (other Iridium Number)
For credit-card billing: 0 + Area Code + Number.
3. Press SND. The telephone number will continue to display for approximately
one second before it is sent. When the call connects successfully, the screen
displays InUse .
4. If you misdial, press CLR to clear the digits and enter the number again.
5. When call is finished, press END to disconnect.
To receive an incoming call:
1. Take handset from holder.
2. Press SND to connect to incoming call.
3. When call is finished, press END to disconnect.
To use the handset as an internal intercom (call other handsets):
1. Take handset from holder.
2. Press FCN key, then 7. The other phone(s) in the aircraft will ring.
3. When call is finished, press END to disconnect.
Press to Reset AirCell Telephone
Press to Scroll Up or Increase Volume
Press to Release Phone from Holder
Press to Scroll Down or Decrease
Volume
Press to Send (Connect)
to Number Entered on Keypad
or Connect to Incoming Call
Press to End Call (Disconnect)
“One Touch Dialing” Keys
See AirCell User Manual for Details
Backlit LCD
Screen
Function Key
Press to Access Additional Menus
and Advanced Functions
Displays Telephone Numbers and
AirCell Telephone Status
See Note Below
Press to Display Active Telephone
Number or Recall Stored Number
See AirCell User Manual for Details
Press to Clear Last Digit Entered
on Keypad
Keypad
Use to Enter Telephone Number
to be Called and Other Functions.
See AirCell User Manual for Details
Press to Store Telephone
Number or Name
See AirCell User Manual for Details