Textron 742105, Setup, Parts & Maintenance Manual

Page: 20 / 58

18
JZT 1000
Series
BELT REPLACEMENT
ENGINE- PUMP BELT
1. Remove the Engine-Gearbox belt. See
Engine-Gearbox belt in the preceding section.
2. Use a 9/16" wrench on the bolt B securing the
idler pulley to rotate the idler arm enough to
remove the belt from the idler and pump pulleys.
Finish removing the belt from the engine pulley.
3. Install the new belt by doing steps 1 and 2 in
reverse order.
PUMP- PUMP BELT
1. Raise the seat and grass collection hopper or
utility box.
2. Remove the Engine-Pump belt from the pump
only. The Engine-Gearbox belt does not need to
be removed. See Engine-Pump belt in the
preceeding section.
3. Rotate the Pump-Pump idler arm enough to
remove the belt from the idler and pump pulleys.
A 3/8" breaker bar may be useful to rotate the
idler arm.
4. Install the new belt by doing steps 1 and 2 in
reverse order.