en-21
SPECIFICATIONS 4
4.7
CUTTING UNIT SPECIFICATION_________________________________________
NOTE These cutting units are designed to cut grass of maximum height 12mm (15/32 in) down to the available
height of cut range, removing no more than 1mm (3/64 in) to 2mm (5/64 in) with each pass.
4.8
CUTTING PERFORMANCE _____________________________________________
7 Blade
9 Blade
11 Blade
15 Blade
Verticut
Construction
Fabricated steel construction
Reel Length
559mm (22
in)
559mm (22
in)
559mm (22
in)
559mm (22
in)
559mm (22
in)
Number of Knives
7
9
11
15
N/A
Number of Blades
N/A
N/A
N/A
N/A
26
Reel Diameter (New)
127mm (5 in)
127mm (5 in)
127mm (5 in)
127mm (5 in)
N/A
Minimum Reel Diame
-
ter
(Before Replacement)
117.5mm
(4.6 in)
117.5mm
(4.6 in)
117.5mm
(4.6 in)
117.5mm
(4.6 in)
N/A
Height of Cut True
-
Set™ Reel (Standard
Blade)
1.6mm - 11.1mm (1/16 in - 7/16 in)
Height of Cut Classic
XP™ Reel (Standard
Blade)
2.5mm - 16mm (0.1 in - 0.63 in)
Height of Cut Classic
XP™ Reel (Tourna
-
ment Blade)
2mm - 16mm (0.78 in - 0.63 in)
Bedknife to Reel
adjustment TrueSet™
Reel
Micro-adjusters
Bedknife to Reel
adjustment Classic
XP™ Reel
Opposed Set Screw
Rolls (Smooth &
Grooved)
50 mm (2 in) Diameter
Height of Cut Adjust
-
ment TrueSet™ Reel
& Classic XP™ Reel
Screw adjusters on front roll
Transmission
By hydraulic motor direct to reel.
Maximum Reel Speed
at Maximum PTO
Speed
2200rpm
Frequency of Cut
@ 2200rpm reel speed
Clip rate
@ 2200rpm reel speed
Blades
mm/kph
inches/mph
Cuts/metre
@ 6.04 kph
Cuts/yard
@ 3.74mph
7
1.247
0.079
41
37
8
0.963
0.061
52
48
11
0.789
0.050
64
59
15
0.584
0.037
87
80
Summary of Contents for 62706
