54
SHB MPE850 Rev A | 409135 |
1
2
8.7 Changing coolant
The following procedure is the practice with a Textron Motors expansion tank. However, the expansion
tank is not always in scope of supply of the engine. If the vehicle equipment is different, observe strictly the
vehicle manufacturer's documentation.
Drain the coolant with a cold engine.
►
Unscrew the expansion tank cover
1
.
The vehicle manufacturer has provided a
drain device. (See the vehicle manufacturer‘s
documentation.)
►
Place the drain tray under.
►
Open the drain device.
Coolant drains off.
►
Fill the expansion tank
2
with clean fresh
water.
Water drains off of the drain device.
►
Repeat the procedure until only clear water
drains off.
►
When no more water drains off, close the
drain device.
8 Service tasks in the workshop
8.7 Changing coolant
Summary of Contents for 409135 I2 846 UTV NA-80
Page 2: ......
