R-DT-UHF-CW-KBW-101 / R-DT-UHF-CW-RS232-101 - User manual
UM001910
Page 3 / 13
Rev. 2.0
–
08 Jun 2022
1
Introduction
The R-DT-UHF-CW-KBW-101 / R-DT-UHF-CW-RS232-101 is an all-in-one stationary reader that is ideal for light
industrial usage.
Its integrated antenna makes it a cost-efficient solution to create redundant reading points in the laundry in
order, for example, to handle lost textiles or to speed-up tag registration.
The reader communicates and is powered through its USB port which makes it particularly easy to install and
configure. It is available in two versions, one allows to send data to the terminal in keyboard wedge (HID) and the
other in serial mode (COM port) and thanks to several configurable parameters, it is possible to customize the
output data string i.e., by cutting the EPC length or adding a prefix to the EPC code as well as being able to set
filters on the readings, etc to fit your needs.
After the first setup (if needed), the reader is a plug and play reader that can be moved anywhere and connected
to any computer to be able to use it to scan your textiles.
This guide is intended to describe how to modify the available parameters to better adapt the operation of the
reader to your needs/requirements.
