R-DT-UHF-CW-KBW-101 / R-DT-UHF-CW-RS232-101 - User manual
UM001910
Page 11 / 13
Rev. 2.0
–
08 Jun 2022
4.2
R-DT-USB-CW-RS232-101
To adjust the desired parameters, follow the below
example made with the “buzzer” parameter
:
1.
Unzip the “R
-DT-UHF-CW-RS232-101-
ConfigTool” folder on your desktop
.
2.
Keep all the documents inside the same folder.
3.
Launch the “UHFapp.exe”
.
4.
In the top left corner select
“SerialPort” and chose the right COM port, then click on “open”
.
5.
Click on “User Settings”
.
6.
A new window with the parameters will pop up. Double click on the parameter you want to adjust.
7.
Type the new value and then confirm with “Set”
.
