15. Storage & handling
The Single Phase Openwell Submersibles are supplied from the factory in proper packing in
which they should remain until they are to be installed
The product should be stored in a closed, dry, and well-ventilated room
Do not store the products under direct sunlight
Handle the pumps with care and do not expose the product to unnecessary impact and shocks
During unpacking and prior to installation, care must be taken while handling the pump to ensure
that the product is not subjected to shock loads
If the product has been stored for a very long period, check the condition of the rubber gaskets,
free rotation of the shaft, and level of water inside the motor
Caution
If the pumpset is stored, the shaft must be turned by hand at least once a month
Caution
If the pumpset has been stored for more than one year before installation, dismantle
the pumpset and check the rotating parts before use. After re-assembly, ensure the
impeller can rotate freely when turned by hand
Caution
Oil seals, in back to back configuration, are provided to prevent water from inside the
motor from escaping. Do not attempt to run the pump dry. If used to lift water from
bore wells, ensure the pump is primed and then only run it
OMOW002A
32
2020.01
