Texmate, Inc. Tel. (760) 598-9899 • www.texmate.com
Page 4
UM-35ACI Data Sheet (UM03)
UM Case Dimensions and Panel Cutouts
Ordering Information
Panel Cutout for Front Panel Removal
To enable removal of the panel meter
from a mounting panel without requiring
rear access, make the panel cutout as
shown above, using the mounting plate
supplied with the meter as a template.
The mounting holes should then be
tapped to match the mounting screws.
1.89"
(47.9mm)
4.06"
(102.7mm)
FRONT VIEW
This NEMA Case will fit any existing cutout
with dimensions that are between the Snug
and Loose Fitting dimensions shown below.
To remove the face plate,
carefully insert screwdriver blade
at bottom slot to release catch and
gently pry outward to release the plate.
1.89"
(47.9mm)
3.6"
(91.44mm)
4.06"
(102.7mm)
0.59"
(15mm)
4.1"
(104mm)
3.34"
(84.6mm)
0.3"
(7.62mm)
1.03"
(26mm)
Mounting
Plate
3.86"
(98mm)
2.05"
(52mm)
4.21"
(106.5mm)
3.84"
(97.5mm)
1.66"
(41.9mm)
Optimum Panel Cutout
not requiring holes
for mounting screws
DIA = 0.125"
(3.0 mm)
2 holes
1.78"
(45mm)
1.64"
(41.6mm)
0.1"
(2.6mm)
3.84"
(97.5mm)
3.58"
(91mm)
0.66"
(16.7mm)
2 places
0.38"
(9.6mm)
Snug Fitting
Loose Fitting
3.7"
(94mm)
4 places
4 places
For new installations see Optimum Panel Cutout
or Panel Cutout for Front Panel Removal
Threaded Holes
3.7" (94mm
)
PCB
Retaining
Brackets
0.18"
4 places
(4.5mm)
0.17"
4 places
(4.3mm)
Standard Options for this Model Number
Part Number
Description
List
BASIC MODEL NUMBER
Includes 2 TB-KITs, standard display
and standard power supply unless optional versions are ordered.
UM-35ACI1
.........DPM AC Amps 1Amp CT Input . . . . . . . . . . . . . . . .
$85
UM-35ACI5
.........DPM AC Amps 5Amp CT Input . . . . . . . . . . . . . . . . .
$85
DISPLAY
STANDARD ....0.56” Red LEDs . . . . . . . . . . . . . . . . . . . . .N/C
UM-BRIGHT ..........Super bright Red LEDs, 0.56 inch high . . . . . . . . . . . . . . . . . .$20
UM-GREEN ...........Green LEDs, 0.56 inch high . . . . . . . . . . . . . . . . . . . . . . . . .$10
UM-GREEN4.5 ......Green LEDs, 0.56 inch high Dummy Zero Option for UM-35s . .$25
UM-LARGE/GRN ...Green LEDs, 0.8 inch high for UM-35 Series . . . . . . . . . . . . . .$35
UM-LARGE/RED....Red LEDs, 0.8 inch high for UM-35 Series . . . . . . . . . . . . . . . .$25
UM-RED4.5...........Red LEDs, 0.56 inch high Dummy Zero Option for UM-35s . . .$25
POWER SUPPLY
STANDARD ....100/120 or 200/240VAC User selectable . . . . . .N/C
V0-DC/ISO ............Isolated auto-sensing AC/DC 9 to 36V DC/12 to 24V AC . . . . .$35
V0-24V..................Isolated transformer 12V AC or 24V AC user selectable . . . . . . .$15
SPECIAL OPTIONS (Specify Inputs or Outputs & Req. Reading)
HD-CHANGE .........Range change from the standard input as shown in
BOLD
type..$7
CB-FS35 ...............Non-Std Range and Scale changes for UM-35 meters ................$10
Special Options and Accessories
Part Number
Description
List
ACCESSORIES (Specify Serial # for Custom Artwork Installation)
75-RPCLEAR . . . . Replacement Clear Lens for meter . . . . . . . . . . . . . . . . . . . . . . $2
75-RPFILTER . . . . Replacement Red Lens for meter . . . . . . . . . . . . . . . . . . . . . . . $2
CN-L15 . . . . . . . . Connector: Dual Row, 30 Pin Edge Conn., 0.156" ctr . . . . . . . . $4
CN-PUSH/UM . . . Connector: Push-on Terminal Block, 120V AC Pwr . . . . . . . . . . $18
CN-PUSH/UM01 . Connector: Push-on Terminal Block, 200-240V AC Pwr . . . . . . $18
CN-PUSH/UM02 . Connector: Push-on Terminal Block,120/240V AC select. . . . . . $20
CN-PUSH/UM03 . Connector: Push-on Terminal Block, 24V AC pwr . . . . . . . . . . . $18
CN-PUSH/UM04 . Connector: Push-on Terminal Block, 9 to 36V DC/12 to 24V AC $18
CN-PUSH/UM05 . Connector: Push-on Terminal Block, 5V DC . . . . . . . . . . . . . . . $18
CN-UM/ANLGC . . Connector: Pinout Changer to match Analogic AN20M02 etc . . $30
OP-N4SEAL/UM . NEMA 4 lens cover for UM Series meters . . . . . . . . . . . . . . . . . $50
RP•CASE . . . . . . Case: Replacement with Mounting Hardware. . . . . . . . . . . . . . . $10
TB-KIT . . . . . . . . . Connector: xtra Screw Terminal Blocks ( 3 sets=1 kit) . . . . . . . . $1
ART-FS-S/D . . . . . NRC for Artwork & set-up Custom Faceplate and or Descriptor . $35
ART-FS-S/D/C . . . NRC for Artwork & set-up Custom Faceplate and Custom Logo. $75
ART-FS-001 . . . . . Produce & Install Custom Faceplate per meter - 1 color no-min $10
ART-FS-002 . . . . . Produce & Install Custom Faceplate per meter - 2 color no-min $20
ART-FS-003 . . . . . Produce & Install Custom Faceplate per meter - 3 color no-min $30
ART-FUM-001 . . . Custom Faceplate, 100 piece Min. ($3.00 each) - 1 color . . . . . $300
ART-FUM-002 . . . Custom Faceplate, 100 piece Min. ($4.20 each) - 2 color . . . . . $420
ART-FUM-003 . . . Custom Faceplate, 100 piece Min. ($5.40 each) - 3 color . . . . . $540
Many other options and accessories are available. See full price list for more details.
Prices subject to change without notice.
WARRANTY
Texmate warrants that its products are free from defects in material and workmanship under
normal use and service for a period of one year from date of shipment. Texmate’s obligations
under this warranty are limited to replacement or repair, at its option, at its factory, of any of the
products which shall, within the applicable period after shipment, be returned to Texmate’s facil-
ity, transportation charges pre-paid, and which are, after examination, disclosed to the satis-
faction of Texmate to be thus defective. The warranty shall not apply to any equipment which
shall have been repaired or altered, except by Texmate, or which shall have been subjected to
misuse, negligence, or accident. In no case shall Texmate’s liability exceed the original pur-
chase price. The aforementioned provisions do not extend the original warranty period of any
product which has been either repaired or replaced by Texmate.
USER’S RESPONSIBILITY
We are pleased to offer suggestions on the use of our various products either by way of print-
ed matter or through direct contact with our sales/application engineering staff. However, since
we have no control over the use of our products once they are shipped, NO WARRANTY
WHETHER OF MERCHANTABILITY, FITNESS FOR PURPOSE, OR OTHERWISE is made
beyond the repair, replacement, or refund of purchase price at the sole discretion of Texmate.
Users shall determine the suitability of the product for the intended application before using,
and the users assume all risk and liability whatsoever in connection therewith, regardless of any
of our suggestions or statements as to application or construction. In no event shall Texmate’s
liability, in law or otherwise, be in excess of the purchase price of the product.
Texmate cannot assume responsibility for any circuitry described. No circuit patent or software
licenses are implied. Texmate reserves the right to change circuitry, operating software, speci-
fications, and prices without notice at any time.
For product details visit www.texmate.com
Local Distributor Address
995 Park Center Drive • Vista, CA 92081-8397
Tel: 1-760-598-9899 • USA 1-800-839-6283 • That’s 1-800-TEXMATE
Fax: 1-760-598-9828 • Email: [email protected] • Web: www.texmate.com
Texmate has facilities in Japan, New Zealand, Taiwan, and Thailand. We also have
authorized distributors throughout the USA and in 28 other countries.
Copyright © 2004 Texmate Inc. All Rights Reserved.
