TEXIO LSG-1050H, Instruction Manual

Page: 157 / 205

147
4-2. Parallel Operation
The LSG-H Series can be connected in parallel to increase the total power
capacity of a single unit. The LSG-H Series can operate with up to 5 units in
parallel. A single unit is designated as a master unit and any other connected
units as slaves.
Only units of the same type and rating can be used in parallel or alternatively,
the LSG-2100SH booster pack can be used as a slave with the LSG-1050H.
When a master unit is used in parallel operation, to ensure stability, the
response speed will drop down to 1/2 if it was originally 1/1. You can however,
reset the response speed back (or to another value) in the Main>Configure
menu.
4-2-1. Capacity of DC electronic loads
Model Single Unit 2 Units 3 Units 4 Units 5 Units
LSG-175H 800V
8.75A
175W 800V
17.5A
350W 800V
26.25A
525W 800V
35A
700W 800V
43.75A
875W
LSG-350H 800V
17.5A
350W 800V
35A
700W 800V
52.5A
1050W 800V
70A
1400W 800V
87.5A
1750W
LSG-1050H 800V
52.5A
1050W 800V
105A
2100W 800V
157.5A
3150W 800V
210A
4200W 800V
262.5A
5250W
LSG-1050H
+
LSG-
2100HS*
800V
157.5A
3150W 800V
262.5A
5250W 800V
367.5A
7350W 800V
472.5A
9450W N/A
* The LSG-2100SH booster packs do not have a control panel.
They can only be used as slaves with a single LSG-2100SH in parallel.