INSTRUCTION MANUAL
RACK MOUNT ADAPTER
GRA-413
© PRINTED IN TAIWAN B71-0451-18
The GRA-413 is the standard rack mount adapter in conformance to the JIS or EIA Standards. It is designed to mount our products.
1. COMPONENT PARTS LIST
Parts Q'ty
Remark
①
BRACKET 3U
4 EIA
（
H133
）
2pcs
JIS
（
H149
）
2pcs
②
JIS RACK HP
1
＊
JIS rack only
③
Screw
M3
×
8
4
＊
JIS rack only
④
Screw
M4
×
8
8
EIA
（
H133
）
4pcs
JIS
（
H149
）
4pcs
2. INSTRUMENT MOUNTING PROCEDURES
(1) Remove the feet from the electric load units.
(2) Attach the bracket
①
to the products. Use either EIA bracket or JIS bracket. In the case of an EIA rack, do not use bracket
②
.
(3) In the case of JIS rack
Put the bracket
②
on the upper part of the product and attached to the bracket1 with a screw
③
INSTRUCTIONS
○
The instrument is heavy. Attach support angles after mounting it on the rack.
We provide no support angles. Use support angles provided by
the rack manufacturer, when a mass-marketed rack is used.
If the instrument is mounted with no spaces above and below it, the support
angles may not be attached. Check before mounting.
Support angles
②
①
④
③