22
REL
Indicates Relative measurement
1st display
Shows the reference value
2nd display
Indicates Relative value modification
2.
Use the Left/Right key to move the flashing point
(cursor), and use the Up/Down key to change the
value.
3.
Press the Enter key to confirm the value, or the Exit
key to cancel. The display switches to
measurement.
(confirm)
(cancel)
Deactivate
Relative
measurement
To cancel the Relative measurement, press the REL key
again, or simply activate another measurement.
3-10. Hold Measurement
Applicable to
( )
+
DCV
ACI
DCI
2/4W
ACV
Hz/P
TEMP
( )
+
Background
Hold measurement retains the current measurement data and updates it only when the
reading fluctuates more than the threshold setting as the percentage of the retained
data.
1. Activate Hold
measurement
Press the HOLD key.
2. Hold
measurement
display appears
HOLD
Indicates Hold measurement
2nd display
Shows the Hold threshold
1st display
The measurement data which is updated only when it fluctuates
more than the threshold compared to the retained value.
3. Select hold
threshold
Select the hold threshold using the
Up/Down key. The 2
nd
display changes
accordingly.
Range
0 ~ 99%, 1% resolution
Deactivate Hold
measurement
To cancel the Hold measurement, press
the Hold key for 2 seconds, or simply
activate another measurement.
3-11. Compare Measurement
Applicable to
( )
+
DCV
ACI
DCI
2/4W
ACV
Hz/P
TEMP
( )
+
Background
Compare measurement checks and updates if the measurement data stays between
the upper (high) and lower (low) limit specified.
