52
Num of Seg
1~29000 (record length
dependant)
Set to Maximum Sets to the maximum number
Set to Minimum Sets to 1 segment
Note
The Select Segments icon is only available when
when Segments = OFF or when Segments is in the
STOP mode (see the section below).
3-2-3. Run Segmented Memory
Background
Before the Segmented Memory function can be
used, set the trigger settings as appropriate for the
signal you wish to use. See page 89 for configuring
the trigger settings.
Run Segments
1. Toggle
Segments
On
from the bottom menu.
2. Toggle
Segments
Run from the bottom menu.
3. The scope will automatically start acquiring
segments. The progress of the segmented
memory capture is shown in the Progress
Indicator.
4. The Run Indicator will be shown when in the
Run mode and the Segments icon will also
indicate that the function is in run mode.
Run Indicator
Progress Indicator
Segment (Run )icon
5. When the scope has finished acquiring
segments, press
Segments Run
to toggle the
mode to the
Segments Stop
mode.
Alternatively, the
Run/Stop
key
can
be pressed.
Run/Stop
