Functional test
TEXIBLE Wisbi must be checked for proper functioning before
each use. Switch on the TEXIBLE Wisbi transmitter. Press the
button
for 3 seconds until the orange LED flashes. This will
lead to a functional test of the electronics and sends an alarm.
Switching TEXIBLE Wisbi off
Once TEXIBLE Wisbi is switched on it is constantly in standby mode
and measures every 2 seconds.
If the transmitter is not used, it can be switched off by pressing the
button
for 3 seconds to preserve the batteries.
By pressing the button
again once, the transmitter is switched
on again.
Changing batteries of TEXIBLE Wisbi
Open the rear cover of the battery compartment by
loosening the screw. Insert three mignon batteries (AA) into the
battery compartment as shown and close the cover again.
4. OPERATING CONCEPT
Function
Button
LED Display
Switching TEXIBLE
Wisbi Transmitter ON
Press
1 x
flashing white
Switching TEXIBLE
Wisbi Transmitter OFF
Press
3 sec
glowing red
Functional test
Press 3 sec
flashing orange
Alarm
flashing orange
Battery low
red & orange
flash alternately
Error
glowing red
5. DISPOSAL INFORMATION
Dispose the TEXIBLE Wisbi transmitter with accompanying
batteries at a designated collection point.
The TEXIBLE Wisbi bed pad can be disposed in household waste.
Please contact your waste disposal company or the representative
for more information about nearby collection points.
Dispose of the packaging material in the collection containers for
cardboard, paper and plastics.
6.
WARRANTY
We rectify any device defects due to material or manufacturing
faults by repair or replacement free of charge within the statutory
warranty period. The warranty expires in the case of intervention
by third parties.
7. EC - DECLARATION OF CONFORMITY
Manufacturer:
TEXIBLE GmbH, Schwefelbadstrasse 2, 6845 Hohenems, Austria
The following guidelines have been complied with:
EMC 2014/30/EU, RED 2014/53 EU, LVD 2014/35/EU,
RoHS 2011/65/EU
The declaration of conformity can be requested from the
manufacturer.
8. CUSTOMER SERVICE
Please contact the manufacturer or your dealer if malfunctions
still occur despite proper handling or if the device has been
damaged.
www.TEXIBLE.com
9. TECHNICAL DATA TEXIBLE WISBI
Size
64 x 100cm
Weight
250g
Water absorption
up to 700ml/m
2
Trigger quantity
10ml
Minimal body weight
(for occupancy detection)
45kg
Material
67% Cotton
30% Polyester
3% Polyurethane
Wash resistance
Power supply
3xAA mignon batteries, LR6
Power
1,4mW
Protection class
IP40
Ambient temperature
0 to +55°C
Battery life
1 year depending on application
Radio
Eldat EasyWave
®
868,3 MHz
Radio range
Up to 30m in the building,
depending on construction
conditions
Battery Compartment
Support Cover
ENGLISH
