4.There is no air compressor for the machine without using it.
5.Some models have no distribution box, only a certain number of AC
contactors are attached.
）
2.Accessories Installation
2.1 380V
(1)Distribution Box
①
.Input
A.
Connect the U-shaped terminals of the Signal&Protection cable to the
A1&A2 of the AC contactor.
B.
Connect the three live wires of the 380V three-phase electricity to
the 1/L1
，
3/L2
，
5/L3 of the AC contactor separately.
(Note:If the fan
reverses, the position of two live wires can be changed arbitrarily)
C.
Connect the 220V Power Cable to the 220V power supply socket.
②
.Output
A.
Connect the aviation plug of the Signal&Protection cable to the
“
Air
Pump
”
port on the machine.
B.
Connect the green cable which has the white wire connectors to the
protector wires on the vacuum pump
，
as shown in the red frame below:
or
Summary of Contents for XYZ 2518
Page 1: ...TEXI XYZ 2518 MANUAL...
