Texi Iris 10 Operation Manual
10
Machine installation
Machine installation procedures are described below and if machine is not correctly installed, shaking or noise
may occur and patterns can’t be correctly embroidered.
Precautions for installation and transportation
Maximum operating environment temperature is 5°C (4 0°F) to 4°C (104°F), and machine operating in a hot or cold environment
may cause permanent damages.
To prevent machine malfunction, avoid exposing the machine to sunlight.
Install the machine on a stable stand in horizontal position, adjust the height by regulating nuts which are located on the feet of
the machine.
To prevent fire caused by overheating machine or damage caused to machine, do not place any objects beneath embroidery
blocking ventilation opening of machine.
The machine weighs about 45kg, and the transportation or installation of embroidery machine shall be performed by two per-
sons.
Ensure two persons raise the machine from the groove in the bottom of machine. since personal injury can be caused by falling
machine.
To prevent machine malfunction, in case of lightening please shut down the machine and unplug power lines.
Before installation, do not insert power lines, to avoid bodily injury which can be caused by accidental activating of the machine
by pressing Start/Stop button.
Do not swallow lubricating grease, and keep children away from machine oil.
Do not touch the machine or any part when installing or disassembling of the embroidery frame or other parts nor during mainte-
nance.
Basic requirements of installation
·Machine should be located at least 50mm (2 inch) away
from the wall.
·Sufficient space should be reserved around the machine—
embroidery frame with hoop will change its position during
embroidering
·Do not place any object in the area of movement range of
embroidery frame.
·Install the machine close to a power socket.
· The machine needs to be installed on stable surface.
·The table under the machine should have the capacity of
more than 45kg.
·Sufficient space shall be reserved around the ventilation
hole behind and below the machine.
Summary of Contents for Iris 10
Page 1: ...MANUAL ...
