Texi Champion SB, Instruction Manual

Page: 4 / 5

USAGE
No need to bend down!
The advantages
-no more rising steam or odors during ironing time
-no more condensation with consequent leakage of drops of water under the board.
-very dry and well ironed linen, essential for keeping garments perfect
-shorter work time, because even delicate materials remain adherent to the work surface.
Switching on
Push the on/off switch.
The suction function
One part of the double pedal placed on the floor makes it possible to work with suction function, which holds
the garment being ironed onto the board, thus preventing wrinkles in the material and also drying out any
remaining dampness. This also completely eliminates steam rising upwards.
The blowing function
The other part of the double pedal is used for blowing function.
The steam generator / iron storage space
This is of standard size, thus ensuring the necessary space for any kind of iron or small steam generator.
Space-saving
The ironing board is spacious, wide and stable when standing open and it has 8 possible height positions.
How to open
When the board is in the vertical position and the storage tray for the iron is on top, pull the back foot
upwards to the height desired. If it should be necessary to change the height later, this can be done by first
putting the board back to its original position.
Use
1. Insert the plug of the ironing board into the appropriate wall socket, after placing the iron / steam generator
on its storage tray.
2. Insert the supply cable of the iron / steam generator into an appropriate electrical supply socket.
3. Switch on the red switch (11).
Note: After the work is finished, leave the ironing board for approx. 30 minutes, occasionaly pushing on the
suction pedal to cool down the board. This operation is essential as it prolongs the life of your ironing board.
Closure
Remove the iron by taking out the plug first. Remove the supply cable of your appliance. Check that no
finished garments have been left on the storage shelf underneath. Lift the board back into the vertical
position, press the knob and pull the back legs towards the board.