1 section:
25%
2 sections: 50%
3 sections: 75%
4 sections: 100%
Charging the PowerPack
In order to charge the PowerPack power
bank , use any household or automobile USB
teXet® charging device* with a maximum
output current of 1 A, 2,1 A or 3,1 A.
Connect a micro USB connector to the cable
provided and place it in the corresponding
port on the case of the PowerPack, and then
connect the cable to the USB charger. The
PowerPack will begin charging automatically.
A flashing LED indicates the charging process,
and the number of constantly illuminated
sections indicates the battery level.
*
The charging device is not included and must be purchased
separately. It is recommended to use the teXet® series
PowerUno (output current 1A), PowerLot (output current
2,1A), or PowerMaster (output current 3,1A).
3
