Texecom Premier External TD-W, Installation Manual

Page: 6 / 8

2m
4m
6m
8m
10m
12m
0m
12m 10m 8m 6m 4m 2m 0m 12m 10m 8m 6m 4m 2m
Active
detection
coverage
6. Coverage Area
2m
4m
6m
8m
10m
12m
0m
12m 10m 8m 6m 4m 2m 0m 12m 10m 8m 6m 4m 2m
Active
detection
coverage
90˚
90˚
90˚
45˚
45˚
Bottom of head unit Bottom of head unit
Top View Top View
Walk-testing
With the range, sensitivity, coverage and pulse count set as desired, enable the LEDs and walk-through the area
of protection. Confirm the LEDs light by using the walk test mode (shown in Premier Elite wireless expander
instructions).
6 INS647-3
LED Status
Left LED on: Device is attempting to learn to a new receiver.
Alternate LED’s flash every second: Device connected to receiver and PIR in warm up.
Both LED’s on at same time: Indicates PIR detection only in walk test mode from the panel.