INS595-4 17/20
1.11 Technical Specification
Environmental
Electrical
Volume
105dB Peak at 1m
(A Weighting, 90°)
Supply
Voltage:
12V DC
Battery
Type:
8 x Lithium type AA
1.5V
High Power
LED Strobe:
320lm
Acoustic
Output
Varying Sound
Output
Flash Rate:
1Hz (typical)*
Cut-Off Time:
15 minutes or 3
minutes(selectable)
Waterproof
Coating:
Conformal
Comfort
LEDs:
Environmental
Protection
IP65
Brightness:
100mcd (typical)
Flash Rate
(tamper
secure):
1/4 sec flash at 5 sec
intervals alternating
(typical)
Wireless
Frequency:
868.0MHz – 868.6MHz
Operating
Temperature:
-25°C (-13°F) to
+55°C (+131°F)**
Storage
Temperature:
-25°C (-13°F) to
+60°C (+140°F)
EMC
Environment:
Residential /
Commercial /Light
Industrial /
Industrial
* The flash rate will reduce to 0.125Hz after flashing for 20 minutes (1 flash every
8 seconds). This is a software feature to reduce power consumption and cannot be
disabled. After 10 days the strobe is cancelled completely. Turning the strobe off
then on again will resume normal operation.
Summary of Contents for Premier Elite Odyssey 1-W
