Premier Elite Com GSM Module Installation Manual
10
INS315-4
What will be sent in the Text Message
The following information will be received in the text message:
Premier 48/88/168/640 & Premier Elite 24/48/88/168/640
Alarm Reporting & Upload/Download via IP
IP Mode (panel port programmed as ComIP, fixed IP SIM card)
1.
Enter “Engineers Programming” mode and select “UDL/Digi Options”, then select “Com Port Setup”.
Ensure Com Port is programmed as “ComIP”. Leave the IP address, port & gateway blank.
2.
Now select the “Digi Options” menu and make sure that “Digi Option 1” is programmed for “Digi is
Enabled”.
3.
Now select “Program Digi” and ensure the following options are programmed for one of the ARC
options:
a)
Protocol:Program as required.
b)
Account No: Program as required
c)
Dialling Attempts: Program as required.
d)
Report Areas: Program as required.
e)
Reports: Program as required.
f)
Config.: Program as required.
g)
Protocol Options : Program as required.
h)
For Upload/Download via Wintex edit the Account/Panel Details and fill in the IP address you have
been given and Port number.
All three status LED’s should now be on, if status LED 3 is off or flashing, this indicates a low GSM signal level. If
the signal level is low, try moving the antenna to improve the reception.
3 W e s t e r n R o a d
1 2 : 4 5 . 5 8 0 1 / 1 2
Z o n e 0 0 3 A l a r m
T h e D e t e c t o r i n
t h e L o u n g e
A r e a : A . . . . . . .
My Home
U p t o 1 6 c h a r a c t e r s o f t e x t ( t h i s i s t h e P r i n t e r H e a d e r )
T i m e a n d D a t e
E v e n t T y p e
Z o n e /U s e r n a m e t e x t
A r e a t h a t c a u s e d t h e e v e n t
N a m e p r o g r a m m e d i n t o p h o n e
