10 INS236
3
Configuring Wintex Software
Once the USB driver is installed you need to configure Wintex software to the
same port that was assigned by the virtual com port driver:
!
Wintex UDL (V5.3)
1)
Run
Wintex
and open the
Modem Settings & Options
screen by
pressing
CTRL+M
on the keyboard:
2)
In the
Modem 1 or 2 Options
section set the com port to the same
number that was assigned by the USB driver, e.g. COM3.
3)
Click on the
Modem Type
drop down list and select
Texecom USB
Modem
from the list.
4)
Click on the
OK
button.
Wintex
is now ready for use.
The
USB-Modem
can be configured for use with earlier releases of Wintex. In
order to do so, you need to create two modem driver entries in Wintex, one for
use with the
Com-300
and one for use with the
Com-2400
:
Com-300
Configuration Setting:
ATFC99=44S30=64^M*
Com-2400
Configuration Setting:
ATFC99=44S30=4^M*
