ComGSM Module
Installation Manual
INS315
5
Using the SMS Control Commands
Control commands can be sent to the
ComGSM
module to allow remote control and
integration of the alarm system.
1.
Select the send text message option on your mobile telephone.
2.
Enter the telephone number of the
ComGSM
module.
3.
Enter the text command, see SMS Control Commands.
4.
Select send on your mobile telephone.
When using the SMS Control Commands shown in the tables below the following
should be noted:
???? = User code, this must proceed all commands.
[areas] = Areas 1 to 8 or A to P. If the areas are not specified then all areas will be
selected.
[s] = Send back status report
(zones) = List of zones, each zone must separated by a space e.g. 1 12 167 etc.
(outputs) = List of outputs, e.g. 1234 etc.
(message) = A maximum of 32 characters.
Premier 24
SMS Control Commands
Operation
Command
Example
Arm System
????
arm
[s]
“5678 arm s” = arm the system and report back
status.
Part Arm System ????
parm
(1/2/3) [s]
“5678 parm 1” = part arm 1 the system (no status)
Disarm System
????
darm
[s]
“5678 darm” = disarm the system (no status).
Reset System
????
reset
“5678 reset” = reset the system
Turn Outputs On ????
op on
(outputs) [s] “5678 op on 2” = turn PC output 2 on.
Turn Outputs Off ????
op off
(outputs) [s]
“5678 op off 1 s” = turn PC output 1 off and report
back status.
Send Message
????
mess
(message)
“5678 mess How Are You” = Displays How Are
You on all keypads.
System Status
????
status
“5678 status” =
System (Disarmed or Armed)
PC Output 1 ON
PC Output 2 ON
