26
Start and stop of engine (electric start)
REMEMBER: Always check engine oil before start!
Fill the engine with 0,6 litre SAE-30 oil the first time.
Oil level must be between min. and. max on the oil stick. Refill if necessary.
Use only unleaded Octane 95 fuel in the engine.
Never fill up the tank completely.
This model is equipped with electric start, which means it
can be started with a key.
You don’t have to pull the start cord, as usually done.
Charge the battery before use
Before the electric start function is used, the battery must be
charged for 12 hours. Put the charger plug into the hole
in the battery and connect the charger to a power supply.
See photo.
The very first time the engine is started, it is recommended to use the start cord.
Because the engine is brand new, it can be hard for the electric motor to start the
engine, as gasoline and oil needs come into the system first.
Same procedure is recommended for first start in every new season.
Procedure for start with key:
1) Pump the primer (A) according to the scheme below:
(the very first time, it might be necessary to pump more times)
2) Pull the front engine-brake handle (B) towards the
main handle
3) Turn the start key until the engine starts
Above procedure can also be followed when using the
start cord. Let the start cord return carefully to the engine
(don’t let go).
Pull the handle (C) up to activate the self-propelling
function.
The handle (B) must be pulled towards the main
handle while using the machine. When the handle is
released, the engine (and the knife) stops in 3 seconds.
C
B
A
Temperatur
Pres
> 0
°
C
3-4
> 0
°
- 10
°
C
2-3
> 10
°
C
1-2