Texas Selekta SLW 610 User Manual Download Page 11

11 

 

 

 

Do not operate the equiment when barefoot or 
wearing sandals. 

 

Exercise extreme caution when changing 
direction on slopes  

 

By rear tillers, ensure that the blades are 
protected by safety shield, only the part of the 
blades that works into the soil must be free. 

 

Never attempt to make any adjustments, while 
the engine is running. 

 

Use extreme caution when reversing or pulling 
the machine backwards 

 

Never operate the engine indoor or in areas 
with low ventilation. The exhaustion from the 
engine contains carbon monoxide. Failure to 
observe could result in permanent injury or 
death. 

 

Gasoline safety 

 

Use extreme care in handling gasoline. 
Gasoline is extremely flammable and the 
fumes are explosive. 

 

Serious personal injury can occur, when 
gasoline is spilled on yourself or your clothes. 
Rinse your skin and change clothes 
immediately! 

 

Use only an approved gasoline container. Do 
not use soft drink bottle or similar! 

 

Extinguish all cigarettes, cigars, pipes and 
other sources of ignition. 

 

Never refuel your machine indoors. 

 

Let the engine cool down before refilling 

 

Never fill the fuel tank to more than 2.5 cm 
below bottom of filler in order to provide space 
for fuel to expansion. 

 

After refueling, ensure that the cap tighten 
securely. 

 

Never use the lock-function on the gasoline 
gun, when refueling. 

 

Do not smoke while refueling. 

 

Never refuel inside a building or where 
gasoline fumes may get in contact with an 
ignition source.  

 

Keep gasoline and engine away from 
appliance, pilot lights, barbecues, electric 
appliances, power tools, etc. 

 

If the fuel tank has to be drained, this shall be 
done outdoors  

 

 
 
 
 
 
 
 
 
 
 
 

Maintenance and storage 

 

The engine shall be stopped when carrying out 
maintenance and cleaning operations, when 
changing tools and when being transported by 
means other than under its own power. 

 

Check regularly that all bolts and nuts are 
tightened. Retighten if necessary. 

 

The engine must be completely cooled before 
storing indoors or covered. 

 

If the machine unused for a period of time, 
please refer to the instructions in this manual.  

 

Maintain or replace safety and instruction 
labels, as necessary. 

 

Only use orginal spare parts or accessories. If 
not orginal parts or accessories is used, the 
liablility is no longer applied.   

 

Replace foulty silencers. 
 

Miscellaneous 

 

The gears are delivered pre-greased. 
However, always ensure they are well greased 
before each use.

 

 

The motor is not pre-filled with oil.

 

 

Factory-fitted control devices, such as the 
handle-mounted clutch cable, must not be 
removed or exposed.

 

 

Only drain the fuel tank outdoors. Gasoline is 
extremely flammable and the fumes are 
explosive.

 

 

Ensure that the machine is properly secured 
when transported on a flatbed etc. 

 

Reduce the throttle during engine shutdown 
and close the fuel valve. 

 
Box Contents 

 
Figure 1: 

A. Machine 

 

B. Handle 

bar 

C. Gear shifter 
D. Swing handle 
E.  Engine manual and user’s manual 

 
Identification of parts 

 
Figure 2: 

A. Brush 
B.  Support wheel for brush / adjustment of height 
C. Wheels 
D. Handle bar 
E.  Clutch handle - Forward and reverse speed 
F.  Clutch handle - Activating brush 
G. Gear shifter 
H. Swing handle 
I.  Engine (may vary from picture) 
J. Belt 

guard 

  

 
 

Summary of Contents for Selekta SLW 610















Reviews: