Side 14
2. Set the switch to ”I” position
3. Set the choke lever to start position
Pull the start cord out slowly from engine until resistance is felt. Then pull strongly in
start cord. Always feed the start cord back into the engine by hand. Pull the start cord
until engine starts, however max 15 times.
If engine does not start, wait a few minutes, push the primer bulb and try again.
4. Set the choke lever to running position
If the engine doesn’t start, repeat the process: ”How to start a cold engine”
How to stop the engine
3. Release the throttle trigger.
4. Set the switch to ”STOP” position
Note that the blower can only start if the dust bag is properly mounted.
